Comments
yourfanat wrote: I am using another tool for Oracle developers - dbForge Studio for Oracle. This IDE has lots of usefull features, among them: oracle designer, code competion and formatter, query builder, debugger, profiler, erxport/import, reports and many others. The latest version supports Oracle 12C. More information here.
Cloud Computing
Conference & Expo
November 2-4, 2009 NYC
Register Today and SAVE !..
SYS-CON.TV
Today's Top SOA Links


Mart Resources, Inc.: UMU-10 Well Update- Initial Flow Test Results
- 1,943 barrels of oil per day ("bopd") stabilized flow rate achieved during clean up from the XXI sand on a reduced 28/64 choke.

CALGARY, ALBERTA -- (Marketwire) -- 01/09/13 -- Mart Resources, Inc. (TSX VENTURE:MMT) ("Mart" or the "Company") and its co-venturers, Midwestern Oil and Gas Company Plc. (Operator of the Umusadege field) and SunTrust Oil Company Limited (together "the Co-venturers") are pleased to announce initial flow rate test results for the UMU-10 well and an update on Umusadege field production for the month of December 2012 and the first week of January 2013.

UMU-10 Well Test Results

As previously announced, the UMU-10 well encountered 479 feet of gross hydrocarbon pay in 20 sands. Six of these sands, XVIIa & XVIIb (commingled), XVIIIa, XIX, XXb, and XXI, are to be perforated, tested, and completed for production. Any two of these zones can be produced simultaneously using dual string sliding sleeve completion technology. The sands completed in UMU-10 are expected to access 161 feet of the total 479 feet of gross pay in the well. Five of the UMU-10 sands (XVIIa & XVIIb (comingled) is treated as one completion interval) have now been perforated and completed. The first extended flow rate test has been conducted on the XXI sand, the deepest of the sands to be tested, at a stabilized rate of 1,943 bopd during initial well clean up.

During the test of the XXI sand, the well flowed 55.3 API gravity oil through 3 1/2 inch tubing on a 28/64 inch choke at a flowing tubing pressure of 1260 psi. Basic sediment and water (BS&W) was 5% with a gas/oil ratio of approximately 588 standard cubic feet per barrel.

Four UMU-10 well tests remain, including the individual testing of the XXb, XIX, XVIIIa, and the co-mingled testing of the XVIIa & XVIIb sands. All sands will be initially tested on restricted choke settings during clean up, as has been done for the XXI sand. Once all completed sands have finished the clean-up operations, each will undergo a multirate flow test on various choke sizes, which may include choke sizes greater than those used for the clean-up operations.

Further updates will be provided on these remaining targeted sands once testing has been completed and results are available.

December 2012 Production Update

As previously reported, there was no production from the Umusadege field in November 2012 through December 20, 2012 due to a shutdown of the export pipeline that started on October 30, 2012. Nigerian Agip Oil Company ("AGIP"), the pipeline operator, has advised that repairs to the export pipeline were completed, and production from the Umusadege field and other fields in the area (collectively the "Cluster") began on a test basis early on December 21, 2012. Production and deliveries into the export pipeline from the Cluster increased to normal levels by the end of December 2012 and have averaged 11,800 bopd during the period from January 1, 2013 to January 8, 2013.

Total crude oil deliveries into the export pipeline from the Umusadege field for December 2012 were approximately 92,000 bbls before pipeline losses. Pipeline and export facility losses for November 2012 as reported by the pipeline operator were 0 bbls, as the pipeline was down for all of November 2012. December 2012 pipeline and export facilities losses have not yet been reported by the pipeline operator. Pipeline and export facility losses as reported by the pipeline operator from the beginning of the year to end of November 2012 are approximately 13.6% of total crude deliveries during this eleven month period.

Wade Cherwayko, CEO of Mart Resources stated: "Mart and its partners are pleased and encouraged with the initial flow test results from the UMU-10 well, which demonstrate that the exceptional reservoir of the Umusadege field extends further than previously assigned. We are looking forward to receiving results from tests of the remaining perforated sands in the coming weeks. We are also happy to report normalized operations for the AGIP pipeline starting in January 2013."

Additional information regarding Mart is available on the Company's website at www.martresources.com and under the Company's profile on SEDAR at www.sedar.com.

INVESTOR RELATIONS:

Investors are also welcome to contact one of the following investor relations specialists for all corporate updates and investor inquiries:

FronTier Consulting Ltd.

Mart toll free # 1-888-875-7485

Attn: Sam Grier or Timea Carlsen

Email: inquiries@martresources.com

Except where expressly stated otherwise, all production figures set out in this press release, including bopd, reflect gross Umusadege field production rather than production attributable to Mart. Mart's share of total gross production before taxes and royalties from the Umusadege field fluctuates between 82.5% (before capital cost recovery) and 50% (after capital cost recovery).

Forward Looking Statements and Risks

Certain statements contained in this press release constitute "forward-looking statements" as such term is used in applicable Canadian and US securities laws. Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or are not statements of historical fact and should be viewed as "forward-looking statements". These statements relate to analyses and other information that are based upon forecasts of future results, estimates of amounts not yet determinable and assumptions of management. Such forward looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements.

In particular, there is no assurance that the Company will be able to successfully test the XVIIa & XVIIb (commingled), XVIIIa, XIX, XXb, and XXI sands or commercially produce, transport or sell oil from the UMU-10 well (or any one or more of the sands identified by the UMU-10 well). Statements (express or implied) regarding the ability of the Company to successfully complete, test and commercially produce, transport and sell oil from the UMU-10 well (or any one or more of the hydrocarbon sands identified by the UMU-10 well), should all be viewed as forward-looking statements. The well log interpretations indicating hydrocarbon-bearing sands are not necessarily indicative of future production. There is no assurance that reserves will be assigned to such hydrocarbon bearing sands. In addition, there is no assurance that there will not be future disruptions of the AGIP pipeline or that future repairs will not be required. Any future disruptions will materially and adversely affect the ability of the Company to transport, deliver and sell its crude oil production from the Umusadege field. Statements (express or implied) concerning the allocation of export and pipeline capacity to the Umusadege field from their party pipeline owners, should also be viewed as forward looking statements.

There can be no assurance that such forward-looking statements will prove to be accurate as actual results and future events could vary or differ materially from those anticipated in such statements. Accordingly, readers should no place undue reliance on forward-looking statements contained in this news release. The forward-looking statements contained herein are expressly qualified by this cautionary statement.

Forward-looking statements are made based on management's beliefs, estimates and opinions on the date the statements are made and the Company undertakes no obligation to update forward-looking statements and if these beliefs, estimates and opinions or other circumstances should change, except as required by applicable law.

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THE RELEASE.

Contacts:
Mart Resources, Inc. - London, England
Wade Cherwayko/Dmitri Tsvetkov
+44 207 351 7937
Wade@martresources.com
dmitri.tsvetkov@martresources.com

Mart Resources, Inc.
Investor Relations
1-888-875-7485
www.martresources.com

About Marketwired .
Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Subscribe to the World's Most Powerful Newsletters
Subscribe to Our Rss Feeds & Get Your SYS-CON News Live!
Click to Add our RSS Feeds to the Service of Your Choice:
Google Reader or Homepage Add to My Yahoo! Subscribe with Bloglines Subscribe in NewsGator Online
myFeedster Add to My AOL Subscribe in Rojo Add 'Hugg' to Newsburst from CNET News.com Kinja Digest View Additional SYS-CON Feeds
Publish Your Article! Please send it to editorial(at)sys-con.com!

Advertise on this site! Contact advertising(at)sys-con.com! 201 802-3021

SYS-CON Featured Whitepapers
ADS BY GOOGLE